Weld Bung
1/8″ NPT MILD STEEL NPT WELD BUNG
KEY FACT
1/8″ NPT Mild Steel — NPT weld bungs from 1/8 NPT to 2″ NPT. Weld to any tube, tank, or manifold for sensor ports, drains, and fluid connections. Thread Standard: ASME B1.20.1 NPT (tapered). Material: 304 Stainless or Mild Steel. SKU NPTWB-18-MS. In stock, ships same day from Miami FL.
SKU: NPTWB-18-MS
NPT weld bungs from 1/8 NPT to 2″ NPT. Weld to any tube, tank, or manifold for sensor ports, drains, and fluid connections. Key specifications: Material: 304 Stainless or Mild Steel.
✓ Free shipping on orders over $150
✓ Same-day dispatch on orders before 2 PM EST
✓ 30-day returns for unused items
✓ Pickup available in Miami, FL 33172 — by appointment
Technical Specifications
| Thread Standard | ASME B1.20.1 NPT (tapered) |
|---|---|
| Material | 304 Stainless or Mild Steel |
| Sizes | 1/8″ NPT – 1″ NPT |
| Weld Base | Hex flat or round flange |
| Seal | Teflon tape or thread sealant required |
| Applications | Sensor ports, drain plugs, coolant connections |
Variant Comparison
All NPT Weld Bung options — your selection is highlighted
| NPT Weld Bung Variant | Price | Thread Standard | Sizes |
|---|---|---|---|
| 1/8″ NPT 304 Stainless | $5.00 | ASME B1.20.1 NPT (tapered) | 1/8″ NPT – 1″ NPT |
| 1/4″ NPT 304 Stainless | $5.00 | ASME B1.20.1 NPT (tapered) | 1/8″ NPT – 1″ NPT |
| 3/8″ NPT 304 Stainless | $6.00 | ASME B1.20.1 NPT (tapered) | 1/8″ NPT – 1″ NPT |
| 1/2″ NPT 304 Stainless | $6.00 | ASME B1.20.1 NPT (tapered) | 1/8″ NPT – 1″ NPT |
| 3/4″ NPT 304 Stainless | $7.00 | ASME B1.20.1 NPT (tapered) | 1/8″ NPT – 1″ NPT |
| 1″ NPT 304 Stainless | $8.00 | ASME B1.20.1 NPT (tapered) | 1/8″ NPT – 1″ NPT |
| 1/8″ NPT Mild SteelSELECTED | $3.00 | ASME B1.20.1 NPT (tapered) | 1/8″ NPT – 1″ NPT |
| 1/4″ NPT Mild Steel | $3.00 | ASME B1.20.1 NPT (tapered) | 1/8″ NPT – 1″ NPT |
Frequently Asked Questions
About the 1/8″ NPT Mild Steel NPT Weld Bung
Do NPT weld bungs need a sealant?
Yes. NPT is a tapered thread that relies on interference — it does not self-seal without sealant. Use PTFE (Teflon) tape or a thread sealant paste like Loctite 567 on all NPT connections. Never use thread sealant on the first thread — start from the second thread to prevent contamination of the line.
1/8 NPT vs 1/4 NPT for sensor ports?
Most oil pressure, fuel pressure, and coolant temp sensors use 1/8″ NPT threads. Air/boost pressure sensors are commonly 1/8″ NPT. The 1/4″ NPT size is standard for larger sensors, -4AN to NPT adapters, and inline bleeder fittings.
Can I weld NPT bungs to aluminum?
Yes. Use a mild-steel bung on steel fabrications and a 304 stainless bung on aluminum using a TIG welder with 4043 filler. An aluminum NPT bung is also available on request. Do not attempt to MIG-weld stainless bungs to aluminum.